Id nr # 630
Semi-automatic wallet pack packaging for sliced ham. Manufactured in Sweden. Dimensions not specified.
ID NR 3304
880 x 90 x 180 cm
Present Burrito hand folding lines are labor intensive operations that are often costly and prone to personal injuries resulting from repetitive motion, such as Carpal Tunnel Syndrome. The Solbern Burrito Folding Machine automatically folds tortillas into finished Burritos. The Machine isa single lane configurationswith an output capacity of 60 Burritos per minute. Each lane consists of a series of folding platforms mounted on a specialized carrier chain providing an endless array. The tortillas are hand placed on each platform. The platforms convey the tortillas to a depositor station where the filling is deposited on the tortillas. A cam assembly hinges the front section of each platform to form the first fold over the filling. The platforms then rotate 90 degrees in preparation for the next folds. The platforms continue to a second cam assembly area where the second and third folds are performed. The hinged sections return to their original position in preparation for the transfer to the final fold stations. A lift arm in each platform transfers the partially folded Burrito onto a smooth conveyor belt, where the final folds will take place. The transfer is performed and a smooth belt conveys the Burrito to a set of jaws which folds the Burrito. The Burrito is released by the jaws and continues on the smooth conveyor to a second set of jaws where the final fold is performed, producing a finished Burrito. The Solbern Burrito Folding Machine produces a consistently uniform product to your product specifications. Year 2016 Single lane operation Speed: up to 60 burritos a minute depending on application 42 product plates, each plate performs 3 folds Plate dimensions: Diameter: 11 inches Bottom folder: approximately 3.5 inches Side folders: approximately 2.5 inches Lifting platen for product placement onto roller belt Eagle claw and smooth belt final burrito roller system Plate rotator for proper folding and product placement Product depositing zone with Guillotine cut off Approximate current diameter: 1.75 inches (change parts can be purchased for other sizes) Pneumatically actuated Tortilla mister: 39 inch long zone Photo eye sensor Mechanical operation Allen-Bradley touch panel Electrical: Volts: 240 Frequency: 60 Hz Phase 3 Stainless steel construction Last production date: 2026
ID NR 2665
230 x 120 x 185 cm
Österberg mod B5 plastic wrapper for troughs with e.g. drinks or other items located in the troughs. Model year: 2006. Capacity: 20 packs/min. Built-in shrink tunnel. Maximum film width: 460 mm. Dimensions: 230 x 120 cm, H 185 cm.
ID NR 3155
280 x 250 x 270 cm
Robopac Rotoplat 106/FRD plastic wrapping machine, year of construction 2002.
ID NR 3148
250 x 195 x 256 cm
Polynova / Nissen type PL 500-LT plastic wrapper, year of construction 2015. Maximum pallet height: 220 cm.
ID NR 3235
280 x 250 x 240 cm
Siat F1L plastic wrapping machine from 2008, in very good condition.
ID NR 3124
450 x 120 x 200 cm
Cryovac packaging line with Cryovac VS 90 belt vacuum machine and Cryovac hot-water shrink tunnel, model ST 77 SRH. Belt width 70 cm. Can be combined with a Busch 400 cc vacuum pump.
ID NR 2959
880 x 110 x 220 cm
Thermoformer Tiromat Powerpack 660. Film width: 420 mm. Includes 3 different molds: 283x385x115 mm, 184x133x110 mm, 280x182 mm. Speed: 10 cycles/min. Documentation included. Year of manufacture: 1996.
ID NR 3097
1100 x 110 x 220 cm
Multivac R245, year of construction 2009. MR labeling system, built-in vacuum pump, MAP machine with a gas mixing device, 4 different tools as shown in the pictures.
ID NR 2953
210 x 110 x 180 cm
Mondini E 590 XL tray sealer with basket dispenser and associated checkweigher from Marel. The machine has previously run minced meat in trays. Associated mould 325 x 265 mm.